Q:Do you sale 1500w or higher hub motor laced into wheel that is 20” diameter by 4” wide for fat tire bike? If so, what are the dropout width options for axle? Can axle dropout width be 150mm wide or even wider? I have a bike frame with 170mm dropout width. I can use torque arms and spacers to fill some of this space, but not too much.
If available please quote price for:
~1500w newest model hub motor with 20” diameter x 4” width wheel (pre-laced service)
~Need motor/wheel laced with 1 cross pattern. Radial lacing is acceptable but not preferred. Black spokes preferred.
~Need 150mm or wider axle dropout width.
~Need turn count which contains HIGHEST AMOUNT COOPER FILL
~Need temp sensor pre-installed in bike motor
~Need single speed freewheel (11 or 12 tooth preferred) pre-installed
~Need SHIPPING to U.S
Also, can you sale with 750W sticker or engrave on bike motor?
A: We can make this 20 * 4 wide Fat Bike wheel.
Please click below site. This is our 20 inch 48V 1000w Fat bike wheel – It’s 20 inch bike conversion kit for fat snow bike.
We also can make 1500w bike motor.
* 1500w with 20 * 4 — Okay. (If your tire is 20 * 4 “, 20 * 3” rim is much better fit for 20 *4” tire. Also,we have 20 *4” rim)
* Please click above site. Wheel looks the same this one.
* At least the dropout 170mm or more
* With temp
* Can use single speed.But min 16 tooth can be installed on this motor. (Can’t use 11 or 12 tooth,only no motor hub use this 11,12)
* Ship to USA is okay.
Q: The tire is “Stingray tire” type. 20″ * 4 1/4″. If you think 3″ wide wheel will fit better ok. 16t freewheel is ok. Rather 1500w if motor will handle more power. Which turn count do you recommend for speed 35mph?
A: We recommend leaf 13 * 5T winding rotor.
Comments are closed.