Leafmotor

Q: I’m looking for a powerful direct drive rear hub motor for a 26″ MTB.
I’ve been looking at this motor:
1.Is this the best 26″ rear hub motor you have or do you recommend any other bike motor?
2.Can this hub motor be delivered with a temp sensor installed?
3.What type of gear cassette will it be able to fit with a 135mm dropout? (How many gears)
4.Can this bike motor run higher than 48 Volts? 52 Volt maybe? Or 72 Volt?

A: 1. We have 26 inch 48V 1500W rear hub motor. We recommend this one
2. With temp
3. Max 7 speed and fit for 135mm dropout. Default for screw on sprocket.(If you need to install cassette sprocket, should leave message when you order.
4. We recommend work at 48V battery.(Max 60V)

Q:Can this same rear hub motor also be delivered with a 27.5″ x 50mm tubeless rim?
I will install a 7-speed cassette sprocket, so very good that it supports this.

A: 27.5” and 26 inch are different rim.
If 27.5” rim is smaller than 700c and larger than 26 inch rim?
* If you need to install your 7-speed cassette sprocket. Please Note when you order.

Q: I want to use the newest 1500w hub motor in this bike:
If you press the green + (View all components) on the page you can see that it has 27.5 INCH x 50mm, tubeless ready rims and 142x12mm (Ai offset lacing) rear drop out.

So I’m wondering if you can deliver the hub motor with a rim that’s the same dimensions as the original rim?

A: We have some sample of 27.5 inch rim in stock. Looks the same to the one on your site.
We only ship two 27.5 inch hub motor kits to USA one time two month ago.(ONLY one customer need this 27.5 inch by now)
This 27.5 rim is smaller than 700c and larger than 26 inch.

Q: This sounds good. Thank you for even taking pictures.
How wide is the 27.5″ rim you have? (How many millimeters)