Leafmotor

I ordered the 48v 1500W electric bike kit, with cassette.
I have problems with the cassette, the cassette is wider than where the dropouts sit around the axle.
So the hub motor wheel with the cassette on is wider than 135mm.
My bike frame is 135mm, and the website said it would fit on a 135mm frame.
When the cassette is on the hub motor wheel and i put the electric bike motor wheel on the bike, the frame grinds against the cassette when I tighten the electric bike motor wheel.
I have made it work using spacers so it spins freely, but the wheel is offset to one side now and i think my frame is spread wider. It is an aluminium frame.
Also the website said max 7 speed gear, but the cassette is for a 9 speed gear, which is also mounted now, is it suppose to be able to take a 9 speed gear, or is that an accident?
Any advice on what to do?
Also, any advice on mounting the torque arms? My frame is aluminium.

Steel is okay.But Aluminium is not good to make it larger. We worry if make aluminium frame to larger will break frame.
We recommend use 7 speed or 6 speed or single speed..

You will receive below goods:
1x pcs of 29 inch 48v 1500w rear hub motor wheel (black spokes, cassette)
1x pcs of 48V bldc motor controller (New version LCD controller)
1x pcs of LCD (New version LCD-003)
1x set of twist throttle
1x set of brake levers
1x pcs of three button switches ( use to control cruise,reverse..)
1x set of pedal assit ( It’s fit for European,if you don’t use,ONLY use throttle is okay )
Some spare spokes with plugs

——————————————-
How to set max speed?
If you feel motor is too fast,please set it to be low speed.
* Press “sw/middle button” from LCD more than 2 seconds,then LCD will display.
* Press “up & down button” together more than 2 sconds until 72 is flashing ( 72 is kmh, if you hope works 20mph / 32kmh, press “down” to be 32)
* Press “sw/middle” button one time to save,then 29 is flashing.. (29 is wheel size. Don’t set)
* Press “sw/middle” button one time to save,then kmh or mph is flashing..
* Press “sw/middle” button one time to save,then press “sw/middle” button more than 2 seconds until be back.