Category Archives: 20 inch hub motor electric bike conversion kit

BMX 20 inch 48V / 52V 1500W rear hub motor – electric bike conversion kit

Q: Can you give quote of just 20 inch 1500W BMX hub motor and wheel only? For BMX 20 inch rear with wheel to fit 2.4” tire. 
Also, does this BMX motor have wires coming out before threads on axle?
https://www.leafbike.com/products/diy-bike-conversion-kit/bmx-20-inch-48v-52v-1500w-rear-hub-motor-electric-bike-conversion-kit-1180.html
 
A: Please click below site. The price and the shipping cost is the same to below link.
https://www.leafbike.com/products/e-bike-hub-motor/20-inch-48v-52v-1500w-rear-bike-motor-wheel-1016.html 
If order, just leave message: BMX motor fit for 110mm dropout.

Q: Is there a physical difference between the 750w, 1000w, and 1500w BMX hub motors themselves? Different number of turns, gauge wire, etc?

A: 36v 750w & 48v 1000w are the same motor. 
1500w is different from 1000w motor.
Difference as below:
1. the width of 1000w is 35mm hub, 1500w is 40mm hub
2. magnet height of 1000w is 30mm, 1500w is 35mm magnet
3. the width of 1000w winding rotor is 30mm, 1500w is 35mm winding rotor

The gauge wire is the same, but 1500w should use much more wires than 1000w.
About number for turns, we can customize different turns for 1000w, 1500w.

Q: Thank you for all the help in choosing what to order. Do the wires come out of the axle inside our outside of the dropouts? I have attached a picture of the wire coming from inside the dropouts.

A: 1500W 135mm dropout motor can use 3mm phase wire – cable inside fork
1500W  110mm dropout BMX motor uses 2mm phase wire – cable out of shaft end, outside fork.

Q: This video is where I am seeing the 110mm BMX setup from leaf bike. In his description, he states it’s a front hub motor “made to fit a sprocket”  and in his video he shows the wires coming from inside the “fork”
Is this something you also do for my order? Or maybe the person is misunderstanding. 

soon to be customer for 20 inch BMX 1500W bike motor kit

Q: Looking for a rear wheel 20 inch hub motor kit for BMX an need a 12t sprocket, also I have a 72v battery for ebike so wondering if I can get a bigger controller to use 72v battery also more amps mean more power is my understanding!

A: max 16t sprocket,we have 16 t sprocket.
12T doesn’t fit for 20 inch hub motor.
Our BMX rear 20 inch bike motor kit can work at 72v, but we should customize low speed if work at 72v battery..
what max speed would you like, 20 inch wheel?

Q: What’s the max speed, wanting 45mph or 50mph 

A: The fastest of our 20 inch bike motor kit works at 52v battery can reach 40mph
If work at 72v, 45mph or 50mph, should make low speed motor.

Q: What’s the OLD size for the drop out?

A: Standard is 135mm..
Not sure your bike, if possible, measure it very easy.

Q: Would u have a 20 inch hub motor kit for a 110mm rear drop out with flywheel for BMX?

A: yes,we have 20 inch 1500w BMX with single speed freewheel fit for 110mm rear fork
https://www.leafbike.com/products/diy-bike-conversion-kit/bmx-20-inch-48v-52v-1500w-rear-hub-motor-electric-bike-conversion-kit-1180.html

Q: What’s the kv eating of the motor so I can maybe switch to a bigger controller

A: The 20 inch BMX bike motor kit you bought that can work at 48v or 52v battery (min 40v ~ max 60v)

Can’t work over 63v, can’t work with 60v battery, can’t work with 72v battery..(Controller & LCD NOT support 60v, 72v battery)

Q: Could I change the controller an display out for 72v controller an display by chance??

A: We have one 72v controller in stock. can drive this motor..
but without LCD.

Also, if works at 72v, should re-customize a slower speed 20 inch bike motor. 

Q: My battery is a 72v 20ah battery pack!

A: 72v 20ah should use 72V controller.

This 20 inch hub motor kit works at 48v battery, can reach about 40mph (no load speed)

If this 20 inch hub motor kit works with 72v controller & 72v battery, it will reach 60mph.. it’s too fast..

We need to customize a lower speed so that reach about 40mph.