Leafmotor

Electric bike conversion kit main features are as follows:
Ultra-quiet design: unique current control algorithm can be applied to any one of the brushless electric car motors, and has considerable control effect and improve the bike conversion kit for universal adaptability, so that no electric vehicle motor and controller then need to match. Constant current control technology: electric bike conversion kit to run the stall current and dynamic current exactly the same, to ensure the battery life, and improve the electric vehicle motor starting torque.

Automatic identification systems in motor mode: automatic identification of electric car motor commutation angle, Hall phase and the motor output phase, as long as the controller of the power cord, turn the brake line and do not take the wrong line, you can automatically identify the motor’s input and output mode, eliminating the need for wiring brushless electric motor car trouble, greatly reducing the use of electric bike conversion kit required.

Servo abs system: an anti-charge / car EABS brake function, the introduction of automotive-grade EABS anti-lock technology to achieve a EABS brake quiet, soft effect, regardless of the brake at any speed to ensure the comfort and stability, abs will not appear in the original case of low speed brake brake phenomenon, and not damage the motor, reducing the mechanical power and mechanical brake system pressure to reduce brake noise, greatly increasing the safety of the vehicle braking; and brake, deceleration or downhill slide will EABS the energy generated back to the cell, play a counter-charge effect, thereby maintaining the battery to extend battery life, increase continues the course, users can adjust their riding habits EABS brake depth . Motor locking system: In the alert, the alarm automatically lock when the motor controller, the controller is almost no power consumption, there are no special requirements on the motor, the battery voltage or other exceptional circumstances, the normal implementation of the electric car has no effect. 

Self-test function: sub-dynamic and static self-self, as long as the power-state controller will automatically detect the associated state of the interface, such as switch handles, brake handle, or other external switch so that if there is failure to control automatically implemented to protect and fully guarantee the safety of riding, when troubleshooting the protection of the state controller will automatically resume. Anti-charging function: braking, deceleration or downhill slide will EABS the energy generated back to the cell, play a counter-charge effect, thereby maintaining the battery to extend battery life, increase continues the course.

Stall protection: automatically determine when the motor is in a completely over-current stall status or running or electrical short-circuit state, if the overcurrent is running, the controller will limit the value set at a fixed value, in order to maintain vehicle driving ability; such as motor stall in pure state, then the controller 2 seconds after the current limit control 10A below, serve to protect the motor and battery, saving energy; such as electrical short-circuit state, the controller is the output 2A current control in the following, in order to ensure the safety of the controller and battery.

Static and dynamic phase protection: means the motor running, the electric car motor break any one phase-phase fault occurs, the controller implementation of protection to avoid motor burn, while protecting the electric vehicle batteries, extending battery life.

Dynamic power management protection: the controller in the dynamic run-time, real-time monitoring of the work of the power tube, once the power control damage to the controller immediately implemented to protect, to prevent the chain reaction of damage to the other power tube, there cart more demanding of the phenomenon. Anti-Speed ​​function: to solve the brushless electric bicycle conversion kit, or line failure due to switch to Speed ​​caused phenomenon, improve system security. 1 +1 power function: Users can adjust or reverse a self-help to help to achieve the combined power in the riding, so the rider feel more relaxed. Cruise features: automatic / manual cruise functional integration, users can choose according to need, 8 seconds into the cruise, steady speed, no need to handle control.

Mode switching function: Users can switch the power mode or power mode. Alarm features: ultra-quiet design, the introduction of the concept of automotive-grade remote anti-theft, theft of more stable, in the alarm state can be locked motor, alarm speaker sound up to 125dB or more, with a strong deterrent. And self-learning function, remote control from up to 150 meters there will be no error generated. Reverse function: Controller added reverse function when the user in the normal riding, the reverse to be disabled; when users stop, press the reverse function keys, can be assisted reversing and reversing speeds not exceeding 10km / h. Remote Control: Remote control the use of advanced technology, up to 256 encryption algorithm, multi-adjustable sensitivity, better encryption performance, and no re-code phenomenon, greatly improved system stability, and self-learning function, remote control distance up to 150 meters there will be no error generated. Speed ​​control: using the latest design for a dedicated single-chip motor control, adding the new BLDC control algorithm for less than the 6000rpm high-speed, medium speed or low speed motor control. Motor Phase: 120 degrees 60 degrees motor automatically compatible, whether it is 60 degrees or 120 degrees electrical motors, can be compatible, without modifying any settings.