Leafmotor

These days 250w hub motor wheels are popular with European. Nearly all of hub bike motor are brushless geared. Because there are several gears inside hub. It has more powerful than 250w brushless geared motor.
Order 1 set 12″ 14″ 16″ 18″ 20″ 24″ 26″ 700c 27.5(650) 27″ 28″ 29 inch hub motor electric bike conversion kit , convert your common bike to e-bike is so easy. Directly front or rear drive your bike.
The important part is an engine -hub motor. How to build this? There are some differences with brushless freewheel hub motor.

Step 1: winding
Calculate motor power, speed RPM and confirm what type of copper wire would you use, wind copper wires by handwork or machine, each notch should be separated by insulating paper so that not shot circuit between the coil. It takes about 1 hour to done it by handwork. And should use rubberized fabric to wrap your fingers. Nipping copper wires will break your fingers.

Step 2: fix axis into motor
Put axis into rotor winding and use a key to fix axis. Use A-B glue to paste three hall sensors on hub motor rotor, put 9-pin (three pin/each hall) into PCB and use insulated wire to fix it. Put 8-pin cable inside the axis and heavy yellow, blue, green wires to connect the three copper wires(Phase A,B,C) separately. Thin red, black wires are be weld to PCB + and – .

Step 3:soak paint
After winding should soak paint in order to be insulated. Use brush to put the insulated paint on the winding and make sure be soaked everywhere. It takes about 24 hours.

Step 4:press gear into hub
Use presser to press steel 90-gear into hub. This hub with one side cover.

Step 5:fix three gears
Use retainer ring and key to fix three white nylon gears on one steel 21-gear.

Step 6:fix magnet
Fix magnet inside the hoops.

Step 7:install rotor winding into this magnet hoops.

Step 8:install there gears on the axis of this rotor winding and put inside of hub with 90-gears.

Step 9:install the other cover.
Use screw driver to tight screw nuts. Done it.

Power on battery and use bldc motor controller to drive this hub motor. If no any strange noise. It’s okay.Then according as the size of your bike to fit this geared spoke hub motor to 20″ 24″ 26″ 27.5″ 700c 27″ 28″ and 29 inch bike kit wheel.

Hub motor, bike kit, bike motor supplier: Leaf Motor Technology Co., Ltd