Leafmotor

These days hub electric bike motor wheels are used for e-bikes widely. Nearly all of hub bike motor are brushless gearless. Because of low noise, high efficiency, long life are popular with riders.
Order 1 set 12″ 14″ 16″ 18″ 20″ 24″ 26″ 700c 27.5″ 650b 27″ 28″ and 29 inch hub motor kit, convert your common bike to e-bike is so easy. Directly front or rear drive your bike.
The important part is an engine -hub motor. How to build this electric bike motor?

Step 1: winding
Calculate motor power, speed RPM and confirm what type of copper wire would you use. Next is fix a rotor on the steel shelf, wind copper wires by handwork or machine. It takes about 1 hour to done it by handwork. And should use rubberized fabric to wrap your fingers. Nipping copper wires will break your fingers. If you need steel parts for your building process, then make sure you use the.

Step 2:soak paint
After winding should soak paint in order to be insulated. Use brush to put the insulated paint on the winding and make sure be soaked everywhere. It takes about 24 hours.

Step 3:press axis into rotor
Put axis into rotor winding and use a key to fix axis. Use A-B glue to paste three hall sensors on hub motor rotor, put 9-pin (three pin/each hall) into PCB and use insulated wire to fix it. Put 8-pin cable inside the axis and heavy yellow, blue, green wires to connect the three copper wires(Phase A,B,C) separately. Thin red, black wires are be weld to PCB + and – .

Step 4:paste magnet
Paste magnet inside hub, one N pole, next S pole ..one by one. More magnet, higher torque, more power. The height of our magnet is 30mm,6mm higher than other hub motor. In market,24mm high magnet only build max 500w electric bike motor. So our bike motor works at 36V can reach 750w.

Step 5:install rotor winding
Put the rotor winding inside the magnet hub, be careful hand. It has powerful magnetism.

Step 6:install two covers
Before installing both covers, we should press bearing into cover. Use hexagon wrench to tight screw nuts. When you hear “poop” from electric bike motor. That means install correctly. Done it.

Power on battery and use bike motor controller to drive this hub motor. If no any strange noise. It’s okay. You also need to make sure you have a controller that fits with the model you are working with, or else the whole thing might just fall apart.

Hub motor, electric bike motor, bike motor supplier: Leaf Motor Technology Co., Ltd