Leafmotor

I have done a lot of research and leaf motor and services keep coming up as a fine choice.

My original choice was the 3000 watt hub motor but I have already spent a lot of money on the electric bike and so that will have to come later but from what I have read this one may do just fine.

I currently run a 6T hub motor with a 48V 20A battery pack in a GT bike frame I build a few years ago and really like the way the hub motor runs but would like more speed so I ordered a new Raptor 76r frame and plan on using leaf motor in that setup so my questions are as follows:

The frame has 150mm dropouts in the rear.
From the previous build I already have a premium 48V 20A rated up to 50A output lithium battery pack that I paid 900.00 to have built so I will have to base the new hub motor and brushless controller around this for now.

AT first I was just going to get the 26 inch 1500 watt 4T leaf hub motor kit but then read it was better to have these in the 17” or 19” motor rim for this frame

Do you offer the hub motor with the 150mm axle?

I want this to run at close 40mph / 60kph the 4T should do that but I also would like the upgraded controller over the standard. What is the best motor controller you offer with the 1500 watt motor?

I also noticed you had a 2000 watt motor in the motorcycle section. Is this hub motor available for the bicycle kit and what are the specs on it?

What controller does the 2000 watt motor use?

I am going to buy at least 2 of these. One in the next week +a bare spare and another in a month or so and then probably 2 or 3 after that. I have several friends that want a bike like mine so after I get mine done will be building theirs as well.

At the least I will order the standard 1500 watt hub motor kit in either the 26 or 24 or 20 rim and then I will just pick up a spare bare hub motor and lace the rim myself.