Leafmotor

Q: I am very happy in viewing your electric bike rear direct drive with
26 inch hub motor wheel item ID # LBM26481500RN. My e-bike setup is 60 volts. Do you
manufacture 26×2.0 inch wheel with 60 volts 1500W rear direct drive
hub motors?
Secondly, also can you fit the bike motor in a fully BLACK rim without any
silver around the rim so it can match with my front wheel because I
use hydraulic disc brakes?
If there is anything that you need to ask me that I am missing, please
feel free to ask, that the purchase moves smoothly and correctly.

A: This 26 inch 48V 1500W rear hub motor wheel can work at 60V.Also,we can spoke this hub motor with all black color rim.

Q: Just a few more questions before I buy, because everything needs to be correct.
Can this bike motor fit any size frame bike?
Is it suitable for regenerative braking?
Does it have three phase hall sensors?
Can it fit 8 gear cogs? Which I am using at the moment with my old motor.
Please tell me the total length of the motor axle from end to end
because I’m using a rear rack ?

A: This 26 inch bike motor is fit for 135mm rear dropout. If your motor controller with regenerative braking function, will have it. It’s three phase with three hall sensors. One cable with 9 wires: heavy yellow, heavy blue, heavy green wires are motor phase wires. Thin red +5V, thin black / GND. Thin yellow, blue & green three wires are connected to three hall sensor.
It can fit for max 7 speed for 135mm dropout. If your frame can be larger, about 140mm,install 8 speed on this rear hub motor is no problem.
Total length of this shaft is 210mm.