S mine fan bldc motor three frequency high-voltage electric tricycle china application

S mine fan bldc motor three frequency high-voltage electric tricycle china application
 
Author: Xu Yingsheng Wang Jihao Sunyan Bo Gu Wei
 
 
Abstract: A crystal by controlling the frequency control to achieve a level, no level adjustment in the electric tricycle china installation and large-scale mine owners bldc motor in the application.
Keywords: three-conversion,electric tricycle china installation

Specificity due to the production of coal, the mine ventilation system related to mine safety in production, so the ventilation system in the coal production has a pivotal position. As long supply line, starting pressure drop, maximum protection devices for safe and reliable start-up and standby bldc motor starter switch, the top priority is to enhance the system reliability. Yangquan Coal Mine in NZ in November 2006, new investment and operation of the main fan bldc motor for the GAF-type axial bldc motor (check the bldc motor by the largest coal mine in Asia through bldc motor controller). The main fan motor 10KV 5000KW bldc motor asynchronous motor. In order to better address the project encountered in starting the impact on the grid, and the problem of load impact, the system used by the Liaoning Rongxin Power Electronic Co., Ltd production of three self-developed high-voltage electric tricycle china frequency equipment.

1, electric tricycle china several Starting device

Divided by the motor starter schematic: 1, reduced voltage starting methods. Traditional vacuum motor starting methods are Y-Δ start, decompression starting autotransformer, reactor start-up and so on. These methods belong to a class start decompression start, there are obvious shortcomings, the process of starting a secondary impact of current. The current high-pressure common way for liquid resistance starter starter, SCR series decompression start. 2, variable frequency start method. With the development of IGBT technology, high frequency voltage levels and larger capacities, but because of the price factor has restricted its development.

Rongxin Power Electronic Co., Ltd., on the basis of the SVC successfully developed three high frequency electric tricycle china, it has three characteristic frequency stepless regulator.

2, three frequency high-voltage electric tricycle china technical principles and characteristics

High-voltage soft-start power supply and motor in series between the main circuit shown in Figure 1.
 
Figure 1 Main circuit diagram

Three frequency high-voltage soft-start technology, the first SCR in series, then by controlling the conduction angle of SCR to achieve a level FM, and non-polar voltage regulator functions. Starting early by controlling the valve in the SA, SB, SC was to achieve a turn-on frequency 12.5HZ, the motor of 1 / 4 the rated speed when the control valve SA, SD, SE switch to 25HZ, the motor to achieve 1 / 2 rated speed, through the control valve SA, SB, SC to complete the full range of the switching process, and ultimately reach the rated speed, the bypass is closed off electric tricycle china trigger pulse to complete the starting process. Throughout the starting process in the three frequency points, while adjusting the frequency, change the output voltage to maintain constant voltage to frequency ratio, so that you can ensure that the entire starting process, the starting torque to keep the rated torque of 80 -90%, while the starting current can be controlled at about 2 times the rated current. Starting torque, starting current, is a three-frequency high-voltage electric tricycle china’s largest technical characteristics.

3, S miners fan motor in the practical application.

Yangquan Coal Mine S is a new mine, it’s power capacity is 35KV, 10000KVA, because the grid is responsible for the underground, Inoue electrical equipment supply, so the grid is relatively small margin, in order to ensure the process does not affect the start Other devices running on the main fan starting current requirements are very strict. And because it is located in the high-gas area, which uses negative pressure was high winds axial bldc motor (two-stage fan is currently Asia’s largest mining axial bldc motor), the main fan motor power of 10KV, 5000KW. Throughout the starting process, showing the starting torque, starting current, a smooth start, the advantages of starting a short time. Measured data in Table 1.

Comments are closed.