We are interested in your 12 inch hub motor kit.
What is the max speed available for this 12 inch electric scooter motor. I can use a low speed hub motor on the back and a high speed motor on the front to compensate for the torque at low speeds.

If last time faster speed hub motor is okay.We can make this electric scooter motor to be faster.（about 20 – 30% faster)

I recently put in an order for two rear hub motors similar to what I have ordered in the past.

Can you make the hub motor fit a standard front fork?

Yes,if not install disk brake on this front motor.
We can make it with the same covers.And hub motor will in the center.
But it will takes about 7 days to customize shaft.
It’s fit for standard 100mm front fork. (90mm fork is also okay)

This front 12 inch hub motor only use V-braking system.
We should check if has correct shaft for this motor in stock.If no,it takes about 7 days to customize this shaft.

Yes,we have 48V 18A controller with LCD for this electric scooter motor. (We don’t have LCD with controller)

Please confirm that the following will be applied to the order.
On center with no disc brake
Please make highest speed – 20 MPH speed using 48 Volt electric bike battery.

Please make sure below 1 & 2
1. the same to past order. It’s rear hub motor. Two side covers are the same with screw thread for spokes & flange — (in the center)
2. would you faster than past ?

I am looking to order more hub motors and would like get updated pricing.
Do you still have the information from past orders?

Yes. We still have 12 inch hub motor.
But we found your order is different from standard motor.
Could you take a picture with your 12 inch motor, front or rear ?
What max speed on 36v or 48v?