Tag Archives: 26 inch hub motor

26 inch 2000W HUB SNOW BIKE KIT – FOR 190MM DROPOUT

Posted by on May 17, 2022 1 comment

Q: Could you tell me the spec of the most powerful hub motor you sell in the 26 inch fat bike kit that will fit a 190mm rear dropout please?
I am looking to buy the hub motor pre-laced in a rim, can you also advise on what battery to go with it.

A: 190mm dropout..
We can make 26 inch 48V 1000w or 26 inch 48V 1500w hub motor
We recommend 48v or 52v 20ah battery.

Q: Thanks for the reply. Can you quote me for a 1500w direct drive hub wound for torque on a 26″ 80mm rim with cassette and place for rim brake with 190mm dropout please?
Here is the bike I want to install it on

A:We have 26 inch 80mm rim
but don’t have cassette version shaft for 190mm hub motor.
ONLY shaft for freewheel sprocket.

Q:Freewheel will be fine.How much to order please?

A:Click below site.  Check out… check out..
choose your country, will get shipping cost & total price.
Leave message: 190mm 26 inch 80mm
(190mm is very important, or send an email to us after paid, need 190mm shaft,  default: 170mm )
https://www.leafbike.com/products/beach-snow-fat-bike-kit/26-inch-48v-52v-1500w-rear-hub-motor-beach-snow-fat-tire-bike-conversion-kit-1081.html

Q:One more question do you have different windings available? Bike will be climbing lots of hills.

A:Yes, we have different windings available..
Just tell us max speed, we can make windings as your max speed.
We can make fastest: 22 x 3T just for e-motorcycle
Also, can make 16 x 4T – fast
13 x 5T
11 x 6T – popular
9 x 7T
8 x 8T – stronger and not too slow
7 x 9T
6 x 11T — slow
5 x 13T
4 x 16T 
…

Q:Which winding works well for long hill climbing without overheating?

A: 11 x 6T is not too slow,also strong.
Don’t worry motor overheating.
ONLY make sure controller is not overheating.. motor will not overheating..
** Don’t pack controller inside bag.Had better to hold it on the frame directly.It’s easy to cool controller in Summer.
** There pairs of heavy yellow,blue,green phase wires must connected well. Had better to use electrical tape winding.

Q: I saw you have a 2000w hub motor model fat bike wheel how fast will that go?
I think that may be my last question
Sorry also does hub motor have a temp sensor or can you add one please?
Hi saw this new model and had questions:
https://www.leafbike.com/products/beach-snow-fat-bike-kit/26-inch-60v-2000w-rear-hub-motor-beach-snow-fat-tire-bike-conversion-kit-1231.html

Your 26 inch 2000w snow bike kits says it can come in 190mm rear dropout, is that correct?

How many amps is the controller?

Can you supply as a thumb throttle instead of twist throttle?

Does motor come mounted inside the wheel?

What windings can you offer on this 2000w version?

Interested In Buy This Hub Motor

Posted by on December 29, 2021 Comments Off on Interested In Buy This Hub Motor

Q: I am very happy in viewing your electric bike rear direct drive with
26 inch hub motor wheel item ID # LBM26481500RN. My e-bike setup is 60 volts. Do you
manufacture 26×2.0 inch wheel with 60 volts 1500W rear direct drive
hub motors?
Secondly, also can you fit the bike motor in a fully BLACK rim without any
silver around the rim so it can match with my front wheel because I
use hydraulic disc brakes?
If there is anything that you need to ask me that I am missing, please
feel free to ask, that the purchase moves smoothly and correctly.

A: This 26 inch 48V 1500W rear hub motor wheel can work at 60V.Also,we can spoke this hub motor with all black color rim.

Q: Just a few more questions before I buy, because everything needs to be correct.
Can this bike motor fit any size frame bike?
Is it suitable for regenerative braking?
Does it have three phase hall sensors?
Can it fit 8 gear cogs? Which I am using at the moment with my old motor.
Please tell me the total length of the motor axle from end to end
because I’m using a rear rack ?

A: This 26 inch bike motor is fit for 135mm rear dropout. If your motor controller with regenerative braking function, will have it. It’s three phase with three hall sensors. One cable with 9 wires: heavy yellow, heavy blue, heavy green wires are motor phase wires. Thin red +5V, thin black / GND. Thin yellow, blue & green three wires are connected to three hall sensor.
It can fit for max 7 speed for 135mm dropout. If your frame can be larger, about 140mm,install 8 speed on this rear hub motor is no problem.
Total length of this shaft is 210mm.

leaf bike 26 inch 48V 1500W rear hub motor wheel kit

Posted by on December 29, 2021 Comments Off on leaf bike 26 inch 48V 1500W rear hub motor wheel kit

Q: I am interested to buy a complete Rear 1500w hub motor wheel ( the latest model with upgraded phase wires, 0.35mm lamination etc).
The model model I think is LBM26481500RN and I would like to know the following before if buy:
– the no load rpm for 4T, 5T and 6T motor at 48v
– and the top speeds under load for 26 inch wheel.
I am looking to have a maximum 55 – 60kph (not less than 55 ) top speed under load but a bit more torque for off road riding.
Also for a electric bike motor with disc brake mount, cassette, temperature sensor and a rim that fits a 2.5 tire is the same price?

A: If not load, 4T 1500w 26 inch hub motor is about 72kmh (work at 48v)
If not load, 26 inch 1500w 5T is about 60kmh (work at 48v)
We can make cassette case motor with 2mm phase wire. But we still recommend standard version with thread screw with 2.5mm phase wire.
Also,standard version is easy to install than cassette case..
* With disc brake mount, cassette,temp,rim fit for 2.5 tire – The same price.
We recommend: with disc brake, standard version (No cassette version),temp,rim fit for 2.5 tire.

Q: can you please send me a more precise data (numbers) about the rpm @ 48V for each available wingdings available, like a performance table or similar?
I found on internet different available information for this motor, but their are not consistent, there are also the forums..and each data is different.
I was hopping that you can provide me more figures..
And also,I don’t understand why for the cassette hub the phase wires are 2mm while there are existing on the opposite side ?

A:Thank you so much for the clear explanations, I understood very well now what are the draw backs for each design.
Also, I was looking over the performance datasheet and I suppose that those parameters are for the 4 turn winding I suppose right?
So for the 5T the maximum rpm with be lower and torque a bit higher. Also the max efficiency point will be at a lower rpm.
Good, so if I want to place an order for a 5T 1500W 26 inch Rear hub motor kit wheel with the following requirements:
disc mount
threaded sprocket
temp sensor
135 mm drop out
26 inch Rim for 2.5 tire (23-25 mm wide rim)
12 gauge spokes

A: Yes. That 4 turn winding.
If 5T, the max rpm with be lower and torque a bit higher.
26 inch wheel, we recommend 5T
Standard rear 1500w 5T with the following requirements
* can install disk the left side of motor
* can install threaded sprocket on the right side of motor
* with temp
* fit for 135mm dropout
* We have 26 inch out.size 25mm or out.size 32mm wide rim (Our 32mm rim is fit for 26 inch)
Please click below sites.
I think 26 inch all black color rim is fit for your 2.5 tire.